1-punts smeerpatronen | ATS serie |
Van de Canadese fabriikant ATS voeren wij het complete programma, van de reeds zeer lang bestaande -en dus zeer betrouwbare- elektrolubers tot en met de krachtige patronen in de Ultimate en Titan serie.
ELECTRO- LUBER™
ORIGINAL Automatic Lubricator
The classic ELECTRO-LUBER™ was developed in 1982. The ELECTRO-LUBER™ uses an electro-chemical reactor cell which converts electrical energy into safe, inert nitrogen gas. The gas is trapped in a hermetically sealed bellows type gas chamber. ATS Electro-Lube was the first company to use this self-contained automatic lubrication technology; as the gas is produced an internal pressure builds up in the bellows and is applied against the orange piston. The piston then forces the lubricant out of the cylinder and into the point of lubrication. The unit can empty between 15 days to 1 year depending on the setting of the simple user-programmable DIP switch. The selection can be changed or turned off at any time.
ULTIMATE LUBER™
Automatic Lubricator
The ULTIMATE LUBER™ is a powerful, motor-driven automatic lubricator which is refillable using standard grease guns. Its microprocessor controlled, energy efficient motor delivers grease to a fixed displacement pump which produces pressures up to 900psi. This strength allows the ULTIMATE LUBER™ to drive lubricant through long feed lines and to cycle progressive distributors to feed several bearings consecutively. When a dispensing cycle is selected, the units will activate at programmed intervals. At each interval, the ULTIMATE LUBER™ dispenses approximately 1.25cc of grease. Neither temperature nor altitude will affect the lubricant output.17 oz/ 500cc 8 oz / 250cc 4 oz / 125cc
TITAN CL LUBER™
Automatic Lubricator
The TITAN CL LUBER™ is a powerful, motor-driven automatic lubricator which is built on the proven ULTIMATE LUBER™ technology. The TITAN CL LUBER™ is refillable by simply replacing a standard grease cartridge. Its microprocessor controlled, energy efficient motor delivers grease to a fixed displacement pump which produces pressures up to 900psi. This strength allows the TITAN CL LUBER™ to drive lubricant through long feed lines and to cycle progressive distributors to feed several bearings consecutively. When a valid dispensing cycle is selected, the units will activate at programmed intervals. At each interval, the TITAN CL LUBER™ dispenses approximately 1.25cc of grease. Neither temperature nor altitude will affect the lubricant output.
TITAN OILER 2000
Automatic Lubricator
The TITAN OILER 2000 is a powerful, motor-driven automatic lubricator which is built on the proven ULTIMATE LUBER™ technology. The TITAN OILER 2000 and its easily refillable, large capacity, 1400cc (47 fl.oz.) tank is perfect for most industrial oiler applications where quality and reliability are needed. Its microprocessor controlled, energy efficient motor delivers oil to a fixed displacement pump which produces pressures up to 2000psi. This strength allows the TITAN OILER 2000 to drive oil through long feed lines and/or through an oil distribution system to feed several applications at the same time. When a valid dispensing cycle is selected, the units will activate at programmed intervals delivering 2cc’s of oil per cycle. Neither temperature nor altitude will affect the output.
op verzoek zenden wij u graag geheel vrijblijvend de complete documentatie betreffende dit product in PDF
klik hier en vermeld in de onderwerpregel "documentatie ATS Ultimate"
ELEKTROLUBERS
ULTIMATE Serie
Battery Packs
|